PraisonAI ToolsMCPServer legacy SSE transport accepts attacker Host/Origin and exposes registered tools

Summary

praisonaiagents.mcp.ToolsMCPServer.run_sse() builds a Starlette MCP
HTTP+SSE server around mcp.server.sse.SseServerTransport. The server exposes
/sse and /messages/, but it does not validate Origin, does not validate
Host, and does not require any authentication.

This is reachable through supported PraisonAI code paths that wrap configured
MCP server tools and re-expose them over legacy SSE:

• praisonai mcp run <name> --transport sse
• praisonai serve mcp --name <name> --transport sse
• direct use of ToolsMCPServer(...).run_sse(...) or
  launch_tools_mcp_server(..., transport="sse")

A malicious website can use DNS rebinding against a local or internal
PraisonAI SSE MCP server and send requests with attacker-controlled Host and
Origin headers. The local PoV binds only to 127.0.0.1, sends an attacker
Host and Origin, lists the registered tool, and invokes it successfully.

The same attacker Origin is rejected by PraisonAI's current Streamable HTTP
transport with HTTP 403. The vulnerability is therefore a sibling transport
guard gap in the legacy SSE wrapper, not intended behavior.

Affected product

• Repository: MervinPraison/PraisonAI
• Packages:
  • praisonaiagents
  • praisonai
• Primary component:
  src/praisonai-agents/praisonaiagents/mcp/mcp_server.py
• CLI wrappers:
  • src/praisonai/praisonai/cli/commands/mcp.py
  • src/praisonai/praisonai/cli/commands/serve.py
• Latest verified release/current head:
  • praisonaiagents 1.6.58
  • PraisonAI 4.6.58
  • repo head 1ad58ca02975ff1398efeda694ea2ab78f20cf3e

Suggested affected ranges:

• praisonaiagents >= 0.6.0, <= 1.6.58
• praisonai >= 3.10.0, <= 4.6.58

No fixed version is known at submission time.

Confirmed source sweep:

v3.0.0   ToolsMCPServer.run_sse helper present, no Origin/Host/auth checks
v3.10.0  praisonai mcp run --transport sse wraps configured tools into helper
v3.12.3  praisonai serve mcp --name --transport sse wraps configured tools
v4.0.0   same vulnerable helper and CLI wrapping paths
v4.4.12  same vulnerable helper and CLI wrapping paths
v4.5.0   same vulnerable helper and CLI wrapping paths
v4.5.56  same vulnerable helper and CLI wrapping paths
v4.5.139 same vulnerable helper and CLI wrapping paths
v4.6.57  same vulnerable helper and CLI wrapping paths
v4.6.58  same vulnerable helper and dynamic PoV succeeds

Impact

If a PraisonAI user starts a local or internal legacy SSE MCP server with
registered tools, an attacker who gets that user to visit a malicious website
can use DNS rebinding to interact with the SSE server through the browser. The
attacker can discover exposed tools and invoke them as the local user.

Impact depends on the configured tools. In realistic PraisonAI MCP deployments,
registered tools may access local files, repositories, issue trackers, cloud
APIs, internal services, or other automation targets. This can lead to
confidentiality, integrity, and availability impact for the resources reachable
by the exposed tools.

The PoV is local-only and harmless. It exposes one marker tool that writes a
canary string to a temporary directory.

Root cause

Current ToolsMCPServer.run_sse() constructs a Starlette app directly:

sse_path = "/sse"
messages_path = "/messages/"
sse_transport = SseServerTransport(messages_path)

async def handle_sse(request: Request):
    async with sse_transport.connect_sse(
        request.scope, request.receive, request._send
    ) as (read_stream, write_stream):
        await mcp._mcp_server.run(
            read_stream,
            write_stream,
            mcp._mcp_server.create_initialization_options()
        )

app = Starlette(
    debug=self._debug,
    routes=[
        Route(sse_path, endpoint=handle_sse),
        Mount(messages_path, app=sse_transport.handle_post_message),
    ]
)

uvicorn.run(app, host=host, port=port)

There is no middleware or route-level check for:

• Origin
• Host
• Authorization
• API key
• allowed origins / allowed hosts

The configured CLI wrapper exposes this path:

from praisonaiagents.mcp import MCP, ToolsMCPServer
cmd_string = " ".join(cmd)
mcp = MCP(cmd_string, timeout=60, env=server.env or {})
tools = mcp.get_tools()
mcp_server = ToolsMCPServer(name=name, tools=tools)
mcp_server.run_sse(host=host, port=port)

By contrast, the current Streamable HTTP transport validates Origin and
returns HTTP 403 for an invalid origin:

origin = request.headers.get("Origin")
if not self._validate_origin(origin):
    return JSONResponse(..., status_code=403)

Local-only PoV

Run from the harness checkout:

uv run --with mcp --with starlette --with uvicorn --with httpx --with anyio \
  python submission-bundle/praisonai-prai-cand-015-mcp-sse-host-origin-bypass/poc/pov_prai_cand_015_sse_mcp_host_origin_bypass.py \
  --repo-src artifacts/repos/praisonai-v4.6.58/src

Observed current-head result:

{
  "candidate": "PRAI-CAND-015",
  "http_stream_control": {
    "attacker_origin": "http://attacker.example.test",
    "rejects_attacker_origin": true,
    "status_code": 403,
    "transport": "current_http_stream"
  },
  "source_checks": {
    "has_auth_check": false,
    "has_host_check": false,
    "has_origin_check": false,
    "has_sse_transport": true,
    "route_count": 2
  },
  "sse_probe": {
    "attacker_headers": {
      "Host": "attacker.example.test:62380",
      "Origin": "http://attacker.example.test:62380"
    },
    "bind_host": "127.0.0.1",
    "marker_value": "executed-from-attacker-origin",
    "marker_written": true,
    "server_started": true,
    "tool_call_content": [
      "recorded:executed-from-attacker-origin"
    ],
    "tool_call_error": false,
    "tool_names": [
      "record_marker"
    ],
    "vulnerable": true
  },
  "vulnerable": true
}

The PoV:

1. imports the current ToolsMCPServer;
2. registers one marker tool;
3. monkey-patches uvicorn.run only to capture the exact Starlette app created
   by run_sse();
4. starts that app on 127.0.0.1;
5. connects to /sse with attacker-controlled Host and Origin;
6. lists tools and calls the marker tool;
7. runs a control against PraisonAI's current Streamable HTTP transport and
   confirms the same attacker Origin is rejected with HTTP 403.

Why this is not intended behavior

This is not only a trust-model disagreement.

PraisonAI's MCP documentation describes Streamable HTTP, WebSocket, and legacy
SSE as supported MCP transport mechanisms. The same documentation says the MCP
module's security properties include origin validation, authentication headers,
and secure session IDs. The transport guide also has a dedicated security
section for origin validation as DNS rebinding prevention and authentication.

The official MCP specification warns that HTTP transports need origin
validation to prevent DNS rebinding, should bind locally for local servers, and
should implement authentication. It also says that without those protections,
remote websites can interact with local MCP servers.

The upstream MCP Python SDK advisory GHSA-9h52-p55h-vw2f / CVE-2025-66416
classifies unauthenticated localhost HTTP/SSE MCP servers without DNS rebinding
protection as a High severity issue because malicious websites can invoke tools
or access resources exposed by the local MCP server. That advisory also says
custom low-level SseServerTransport configurations should explicitly configure
transport security settings when running unauthenticated localhost servers.

PraisonAI's current Streamable HTTP implementation already enforces an Origin
guard and rejects the exact attacker Origin used in the PoV. The issue is that
the legacy SSE sibling path lacks the same boundary.

Suggested severity

Suggested severity: High.

Rationale:

• AV: the attack uses browser-origin HTTP requests to a local/internal
  service.
• AC: practical exploitation requires DNS rebinding or equivalent browser
  origin setup.
• PR: no PraisonAI credentials are required by the SSE server.
• UR: the user must visit an attacker-controlled page.
• S: the vulnerable transport exposes tools that operate on resources
  outside the HTTP transport itself.
• C/I/A: exposed tools may read, mutate, or disrupt local/internal
  resources depending on the configured MCP server.

Suggested fix

Bring legacy SSE server security in line with the current Streamable HTTP
transport, or disable the legacy SSE server path.

Recommended changes:

1. Add explicit allowed-origin and allowed-host validation to both /sse and
   /messages/.
2. Reject invalid Origin with HTTP 403 before opening the SSE stream or
   accepting POST messages.
3. Validate Host for local and internal deployments to mitigate DNS rebinding
   even when browsers omit or vary Origin.
4. Require authentication for all non-stdio MCP HTTP transports, including SSE.
5. Add --api-key, --allowed-origins, and --allowed-hosts options to
   praisonai mcp run and praisonai serve mcp when --transport sse is used.
6. Where the installed MCP SDK supports it, configure the SDK transport-security
   settings for low-level SseServerTransport usage instead of mounting it
   without Host/Origin protection.
7. Consider deprecating or disabling --transport sse server mode in favor of
   the current Streamable HTTP implementation.
8. Add regression tests proving that attacker Host and Origin values are
   rejected on both /sse and /messages/, and that current Streamable HTTP and
   legacy SSE enforce the same boundary.